Contains from:
1. Metal casting " Made with love" element with hole on the top;
2. 29ss (SW 1088) lever back earrings base;
3. 12mm lobster clasp;
4. 29ss stone setting with top loop;
5. three 29ss Swarovski Crystals: Pacific Opal color;
6. five pcs of 5mm jump rings;
7. 50cm of 3.8mm Rolo chain.
Click here to buy Basic Young Kit
1 Step: Earrings
Place the crystal in the stone setting of the earring, and hold it in place.
Use the Square Steel Prong Pusher tool and press the metal prongs on the 29ss lever back earrings base.
2 Step: Embedding the stone setting
Do the same with 29ss stone setting. Place the crystal in the stone setting, and hold it in place.
Use the Square Steel Prong Pusher tool and press the metal prongs on the stone to set it in place.
3 Step:Connecting
Open 5mm jump rings with the help of two plier tools.
Connect (using jump rings) metal casting element to the middle of the Rolo chain.
Do the same with 29ss pendant.
.jpg)
.
4. Put the lobster clasp
Open 5mm jump rings with the help of two plier tools.
Connect the Rolo chain and 12mm lobster clasp on one side using the small 5mm jump rings that you have opened, and jusp a closed jump ring to the other side of chain.
And that's it.
Your Young Basic Set is ready!
Have fun creating:)